Nissan Qashqai e-POWER 2023 Owners Manual
7.6.2.4. Automatic operation (AUTO)
The AUTO mode may be used year-round as the system automatically controls constant temperature, air flow distribution and fan speed after the desired temperature is set manually.
Turning off the heater and air conditioner
To turn off the heater and air conditioner, push the <ON OFF> button.
Cooling and dehumidified heating
Push the <AUTO> button.
If the A/C indicator light does not illuminate, push the <AUTO> button. (The A/C indicator light will illuminate.)
Turn the temperature control dial to set the desired temperature.
If the indicator light on the air recirculation
button is illuminated, push the button with the light illuminated to switch the air recirculation mode OFF.
A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.
Heating (A/C off)
Push the <AUTO> button.
If the A/C indicator light illuminates, push the <A/C> button. (The A/C indicator light will turn off.)
Turn the temperature control dial to set the desired temperature.
Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature to not be controlled properly.
If the windows fog up, use dehumidified heating instead of the A/C off heating.
Dehumidified defrosting/defogging
Push the front defogger
MAX button. (The ${1} MAX indicator light will illuminate.)Turn the temperature control dial to set the desired temperature.
To remove frost from the outside surface of the windscreen quickly, set the temperature to a high temperature.
The system will set the fan speed to maximum automatically.
The air recirculation mode will automatically turned off and the air conditioner will be activated automatically.
Air flows mainly from the defogger outlets.
Push the front defogger
MAX button again to return to the previous mode or the <AUTO> button for auto climate control mode. (The${1} MAX indicator light will turn off.)