Manuals

Nissan Qashqai e-POWER 2023 Owners Manual

7.12.1.2.Bluetooth® settings

Enter the phone setup menu via the image (phone) button, select the [Bluetooth] key, and then check if the Bluetooth® is set to on (default setting is on, push the <OK> button if not).

To setup the Bluetooth® system to pair (connect or register) your preferred mobile phone, follow the following procedure.

To pair a device, use the [Scan devices] key or the [Pair device] key.

Up to 5 different Bluetooth® devices can be connected. However, only one device can be used at a time. If 5 different Bluetooth${1} registered devices are registered, a new device can only replace one of the 5 existing paired devices. Use [Del. device] key to delete one of the existing paired devices. For details, see

[Del. device]
.

When successfully paired a notification message will be displayed, then the audio system display will return to the current audio source display. During connection the following status icons will be displayed (top left of the display): Signal strength (image), Battery status* (image) and Bluetooth® “ON” (image).

*: If the low battery message comes on, the Bluetooth® device must be recharged soon.

The pairing procedure and operation may vary according to device type and compatibility. See the Bluetooth® owner’s manual for further details.

image

  • For device details, see your audio/mobile phone Owner's Manual.

  • For assistance with the Bluetooth® audio/mobile phone integration, please visit your local NISSAN dealer or qualified workshop.

  • A maximum of 5 Bluetooth® devices can be paired with the system.

To set up the Bluetooth${1} system with a device the following items are available:

image

  • [Scan devices]

    Shows all available visible Bluetooth® devices and initialises Bluetooth${1} connection from the audio unit.

  • [Pair device]

    Initialises Bluetooth® connection from the mobile device.

  • [Sel. device]

    Paired Bluetooth® devices are listed and can be selected for connection.

  • [Del. device]

    A registered Bluetooth® device can be deleted.

  • [Bluetooth]

    If this setting is turned off, the connection between the Bluetooth® devices and the in-vehicle Bluetooth${1} module will be cancelled.

[Scan devices]

  1. Press the image button. Select [Scan devices]

    The audio unit searches Bluetooth® devices and shows all visible devices.

    Pressing the image button cancels the search.

  2. Select the device to be paired.

    Use the <MENU> dial and press to select.

  3. The pairing procedure depends on the device to be connected:

    1. Device without PIN code:

      The Bluetooth® connection will be automatically connected without any further input.

    2. Device with PIN code:

      Two different ways of pairing are possible depending on the device:

      • Type A:

        The message [To pair] [Enter Pin] 0000 and a countdown timer will be displayed.

        Confirm the PIN code on the device.

        The Bluetooth® connection will be made.

        If the countdown timer reaches 0 the attempt to pair the devices will be cancelled.

      • Type B:

        The message [Pairing request] [Confirm password] together with a 6 digit code will be displayed. The unique and identical code should be displayed on the device. If the code is identical confirm on the device.

        The Bluetooth® connection will be made.

[Pair device]

Turn on the Bluetooth® on the audio unit. See

[Bluetooth]
.

  • Use the audio unit to pair:

    Push the image button on the instrument panel. Select the [Pair Device] key.

    The pairing procedure depends on the Bluetooth® device to be connected:

    1. Device without PIN code:

      The Bluetooth® connection will be automatically connected without any further input.

    2. Device with PIN code:

      Two different ways of pairing are possible depending on the device. For the correct procedure details, see

      [Scan devices]
      .

  • Use the Bluetooth® audio/cellular phone device to pair:

    1. Switch on the search mode for Bluetooth® devices. If the search mode finds the audio unit, it will be shown on the device display.

    2. Select the unit device shown as [My Car].

    3. Enter the number code shown on the relevant Bluetooth® device with the device's own keypad, and push the confirmation key on the device and the <MENU> / <OK> dial on the audio unit.

When an Apple device is connected via the USB connection port and Bluetooth®, the device will be recognised as a USB device. The battery of the Apple device is charged while the cable is connected to the USB connection port.

Refer to the relevant Bluetooth® device Owner’s Manual for further details.

[Sel. device]

The paired device list shows which Bluetooth® audio or mobile phone devices have been paired or registered with the Bluetooth${1} audio system. If the list contains devices then select the appropriate device to connect to the Bluetooth${1} audio system.

The following symbols (where fitted) indicate the capability of the registered device:

  • image : Mobile phone integration

  • image : Audio streaming (A2DP – Advanced Audio Distribution Profile)

[Del. device]

A registered device can be removed from the Bluetooth® audio system. Select a registered device then press <OK> to confirm the deletion.

[Bluetooth]

If Bluetooth® has been switched on a notification message [ON/OFF] appears when you select [Bluetooth] from the phone menu (press image). To switch the Bluetooth${1} signal on, press <OK> and a follow up screen will appear. Then select [ON] and press image to display the Bluetooth${1} settings menu screen.

Parent topic:
Bluetooth® mobile phone feature