Nissan Qashqai e-POWER 2023 Owners Manual
8.29.2. How to enable/disable the parking sensor (sonar) system

- Steering-wheel-mounted control (left side)
- Vehicle information display
The system is automatically activated when the power switch is switched ON and the shift control system is in the R (Reverse) position.


When the shift control system is in R (Reverse) and the [Parking Aids] screen is displayed in the vehicle information display the parking sensor (sonar) system can be disabled temporarily by pushing the <OK> switch on the steering wheel.
The system will remain disabled until the shift control system is shifted to N (Neutral) or P (Park) or vehicle speed exceeds 12 km/h (7.5 MPH).
Perform the following steps to set up the parking sensor (sonar) system function:
Push the
button until [Settings] appears in the vehicle information display and then push the scroll dial. Use the scroll dial to select [Driver Assistance]. Then push the scroll dial.
Select [Parking Aids] and push the scroll dial.
Use the scroll dial to navigate in the menu and select or change an item:
[Moving Object]
Turns ON/OFF the Moving Object Detection (MOD) (See
.)
[Rear]
Turns ON/OFF the parking sensor (sonar) system
[Distance]
Changes the parking sensor (sonar) system sensor’s detection distance to [Far], [Medium] or [Near]
[Volume]
Changes the volume of the tone sound to [High], [Med.] or [Low]