Nissan Qashqai e-POWER 2023 Owners Manual
5.16.1.5. If the windows do not close automatically
If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialise the power window system.
Switch the e-POWER system power switch ON.
Close the door.
Open the window completely by operating the power window switch.
Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely.
Release the power window switch. Push the power window switch down and hold it until the window is fully open.
Operate the window by the automatic function to confirm the initialisation is complete.
Perform steps 2 through 6 above for other windows.
If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer or qualified workshop.