Nissan Qashqai e-POWER 2023 Owners Manual
8.12.3. Intelligent Blind Spot Intervention system operation
- BSW LED indicator on the door mirror glass (where fitted)
- ProPILOT Assist status indicator light (where fitted) or Safety Shield indicator light (where fitted) in the vehicle information display
- BSW indicator
- Vehicle Information Display
- ProPILOT Assist switch (for models with ProPILOT Assist)
- Safety Shield switch (for models without ProPILOT Assist)
If the radar sensors detect vehicles in the detection zone, the BSW LED indicator light located on the outside mirrors illuminates. If your vehicle is approaching a lane marker, the system chimes a sound (three times) and the BSW LED indicator light and the BSW indicator will flash. Then the system applies the brakes on one side of the vehicle for a moment to help return the vehicle back to the centre of the lane. Intelligent Blind Spot Intervention operates regardless of turn signal usage.
Warning and brake control will only be activated if the BSW LED indicator light is already illuminated when your vehicle approaches a lane marker. If another vehicle comes into the detection zone after your vehicle has crossed a lane marker, no warning or brake control will be activated. For additional information, see
. The Intelligent Blind Spot Intervention system is typically activated earlier than the Intelligent Lane Intervention (ILI) system when your vehicle is approaching a lane marker.The Intelligent Blind Spot Intervention system turns on when either the ProPILOT Assist switch (for models with ProPILOT Assist) or the Safety Shield switch (for models without ProPILOT Assist), or the speed limiter switch on the steering wheel is pushed when the Blind Spot Intervention is enabled in the [Driver Assistance] menu in the vehicle information display.
The ProPILOT Assist status indicator light (for models with ProPILOT Assist) or Safety Shield indicator (for models without ProPILOT Assist) on the vehicle information display illuminates.