Nissan Qashqai e-POWER 2023 Owners Manual
8.26.2.1. Parallel parking
The system detects parking slots and shows the status by displayed text messages.
Press the <CAMERA> button to display the Intelligent Around View Monitor (IAVM) on the centre display.
Press the IPA button
on the screen or the IPA switch (where fitted) on the lower instrument panel.
Press Parking Mode button
, and check the parallel parking mode is displayed.
Use the turn signal switch to select the side of the vehicle the IPA system should use to find a parking space. The scanning area will change sides, depending upon the position of the turn signal switch.
Drive the vehicle forward at a steady pace along side the row of parked vehicles. The system will search for a parking space. The IPA system will inform you when it finds a suitable parking space. When parking slots cannot be detected, a target parking rectangle is displayed at a default position by pressing the
button. Then you can press [Start].Slowly move the vehicle forward to the correct position until the IPA system instructs you to stop and select reverse gear.
If there is any doubt that the surroundings in the path of the parking area and/or the parking area itself are not free from obstacles immediately stop the vehicle and check.
Make sure the vehicle is stopped completely before shifting to the R (Reverse) position.
Follow the instructions given by the system. Shift to the R (Reverse) position.
Gently place your hands on the steering wheel and slowly reverse towards the parking space.
The steering will be operated automatically.
Carefully and slowly accelerate while checking the surroundings.
Do not turn the steering wheel.
The system indicates when the parking procedure has ended.
Only the steering operates automatically.
Follow the instructions given by the system.
Carefully and slowly accelerate while checking the surroundings.
Use of the steering wheel will cancel the IPA operation.
When the vehicle is in the target parking position, check, then depress the brake pedal to stop the vehicle.
When the vehicle reaches the approximate area of the target parking space, a chime will sound, [Park assist finished] will appear on the centre display and the IPA operation will automatically terminate.
Make any final adjustments that may be necessary manually, after confirming the vehicle's surroundings.
The system can be cancelled at any time:
By engaging the P (Park) position.
By shifting to the N (Neutral) position.
By overriding the steering manoeuvre.
By pressing the [Cancel] button on the centre display.