Nissan Qashqai e-POWER 2023 Owners Manual
4.1.1.2. Power seat adjustment (where fitted)
To help avoid risk of injury or death through unintended operation of the vehicle and/or its systems, do not leave children, people who require the assistance of others or pets unattended in your vehicle. Additionally, the temperature inside a closed vehicle on a warm day can quickly become high enough to cause a significant risk of injury or death to people and pets.
Operating tips
The power seat motor has an auto-reset overload protection circuit. If the motor stops during the seat adjustment, wait 30 seconds, then reactivate the switch.
To avoid discharge of the battery, do not operate the power seats for a long period of time when the e-POWER system is not ON.
Forward and backward
Move the adjusting switch (1) forward or backward to the desired position.
Reclining
Move the adjusting switch (2) forward or backward to the desired position.
The reclining feature allows the adjustment of the seatback for occupants of different sizes to help obtain the proper seat belt fit. (See
.)The seatback may be reclined to allow occupants to rest when the vehicle is parked.
Seat lifter/tilter (where fitted)
Move the adjusting switch (3) as shown to adjust the angle of the front portion or height of the seat. Pull the front or rear of the adjusting switch (3) up or push down to adjust the seat height and angle until the desired position is achieved.
Lumbar support (where fitted)
The lumbar support feature provides lower back support to the driver.
Push each side of the adjusting switch to adjust the seat lumbar area until the desired position is achieved.
- To raise the seatback contour
- To soften the seatback contour
- To lower the seatback contour
- To harden the seatback contour