Nissan Qashqai e-POWER 2023 Owners Manual
8.21.7.6. Steering Assist Activation/Deactivation
Use the following methods to enable or disable the Steering Assist.
ProPILOT Assist switch on steering wheel
Press the ProPILOT Assist switch. This will turn ICC on. Note that Steering Assist may already be switched on, depending on the settings in the [Settings] menu. These settings are retained if the e-POWER system is restarted.
Then press <SET–> on the right-hand steering wheel switch to set cruise control speed. When the system detects clear lane markings the Steering Assist icons will turn green and the Steering Assist system will become active. For Turkey, a chime will sound when Steering Assist restarts.
The Steering Assist icon will remain grey if the vehicle is driven at speeds under 60 km/h (37 MPH) and no vehicle ahead is detected.
Steering Assist switch
To turn the Steering Assist ON or OFF, push the Steering Assist switch on the instrument panel.
When the Steering Assist switch is used to turn the system ON or OFF, the system remembers the setting when the e-POWER system is restarted. The switch must be pushed again to change the setting to ON or OFF.
The Steering Assist switch changes the status of the [Steering Assist] selection made in the [Settings] screen in the Vehicle Information Display.
Setting in the Vehicle Information Display
Push the
button on the steering wheel (1) until [Settings] appears in the vehicle information display (2) and then push the scroll dial.Use the scroll dial to select [Driver Assistance]. Then push the scroll dial.
Select [Steering Assist] and push the scroll dial to turn the Steering Assist on or off.
When the Steering Assist screen is displayed on the Vehicle Information Display, press the <OK> button on the steering wheel to show the [Driver Assistance] setting menu.
When enabling/disabling the system through the Vehicle Information Display or when pressing the Steering Assist switch, the system retains the current settings even if the e-POWER system is restarted.