Nissan Qashqai e-POWER 2023 Owners Manual
8.23.2. System maintenance
The sensor (A) is located at the front of the vehicle.
The camera (B) is located on the upper side of the windscreen.
The sensor for the Intelligent Emergency Braking system (A) is located at the front of the vehicle.
To keep the Intelligent Emergency Braking system operating properly, be sure to observe the following:
Always keep the sensor area clean.
Do not strike or damage the areas around the sensor.
Do not cover or attach stickers or similar objects near the sensor area. This could cause failure or malfunction.
Do not attach metallic objects near the sensor area (brush guard, etc.) This could cause failure or malfunction.
Do not place reflective materials, such as white paper or a mirror, on the instrument panel. The reflection of sunlight may adversely affect the camera unit’s detection capability.
Do not alter, remove or paint the front of the vehicle near the sensor area. Before customising or restoring the sensor area, it is recommended that you visit a NISSAN dealer or qualified workshop.
For the radio approval numbers and information, see
.