Nissan X-Trail e-POWER 2023 Owners Manual
6.4.1.2. For models without ultrasonic sensor and tilt sensor (where fitted)
How to activate system
Close all windows and sunroof (where fitted).
The system can be armed even if the windows are open.
Place the power switch in the “OFF” position.
Remove the Intelligent Key from the vehicle.
Close all doors, bonnet and back door. Lock all doors. The doors can be locked with the Intelligent Key, the lock sensor (on the front door handles) (where fitted), request switch (where fitted), power door lock switch or mechanical key.
Even when the driver and/or passengers are in the vehicle, the system will activate with all doors, bonnet, and back door locked with the power switch in the “OFF” position. When placing the power switch in the ON position, the system will be released.
Theft warning system operation
The vehicle security system will give the following alarm:
The hazard indicator lights blink and the horn sounds intermittently.
The alarm automatically turns off after approximately 27 seconds. However, the alarm reactivates if the vehicle is tampered with again.
The alarm is activated by:
Unlocking the door or opening the back door without using the button on the Intelligent Key, the capacitive unlock sensor (on the front door handles) (where fitted), the request switch (where fitted) or the mechanical key. (Even if the door is opened by releasing the door inside lock knob, the alarm will activate.)
Opening the bonnet.
How to stop alarm
The alarm will stop only by unlocking a door by pushing the “UNLOCK”
button on the Intelligent Key.The alarm will not stop if the power switch is placed in the ON position.