Nissan X-Trail e-POWER 2023 Owners Manual
5.4.3.11.
Malfunction Indicator Light (MIL)
Continuing vehicle operation without proper servicing of the emission control system could lead to poor driveability, reduced fuel economy, and damage to the emission control system, which may affect the vehicle’s warranty coverage.
Incorrect setting of the emission control system may lead to non-compliance of local and national emission laws and regulations.
When the power switch is in the ON position, the Malfunction Indicator Light (MIL) illuminates. After starting the e-POWER system, the MIL turns off. This indicates that the emission control system is operational.
When the power switch is in the ON position, sometimes the MIL may illuminate for 20 seconds and then blink for 10 seconds, without the engine running. This is due to a function of checking the emission control system, and it is not a malfunction. After a few normal drives, this function will not occur and the MIL stays illuminated with the power switch in the ON position.
If the MIL illuminates or blinks when the READY to drive indicator light illuminates, it may indicate a potential emission control system malfunction. In this case, the emission control system may not function properly and may need servicing. Have the system checked, and if necessary repaired, by a NISSAN dealer or qualified workshop promptly.
Precautions
To reduce or avoid possible damage to the engine control system when the MIL blinks:
Avoid driving at speeds above 70 km/h (43 MPH).
Avoid sudden acceleration or deceleration.
Avoid going up steep uphill grades.
Avoid carrying or towing unnecessary loads.