Nissan X-Trail e-POWER 2023 Owners Manual
7.8.1. Operating tips
When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may be limited when in the automatic mode. However, this is not a malfunction. After the coolant temperature warms up, air flow from the foot outlets will operate normally.
For rear temperature control (where fitted):
The purpose of the rear temperature control is to vary the temperature of the rear air flow.
The amount of air flow to the rear vents is primarily controlled by the front passenger’s blower and mode settings.
The amount of air flow to the rear vents is also affected by the rear temperature setting. Higher rear temperature settings have lower air flow amounts than cooler temperature settings. This condition ensures better comfort to the head and face area, while primary heating for the rear passenger seats is provided through the foot outlets.
Sensors:
The sensors (1) and (2), located on the instrument panel, help maintain a constant temperature. Do not put anything on or around the sensors.
The layout in the illustration is for the Left-Hand Drive (LHD) model. For the Right-Hand Drive (RHD) model, the sensors (1) and (2) are located on the opposite side.