Nissan X-Trail e-POWER 2023 Owners Manual
11.20.10.1. Preparing tools
Open the back door. Raise the luggage floor board. Remove the jacking tools.
The jack, jack rod and wheel nut wrench are not equipped as standard with this vehicle. Contact a NISSAN dealer or qualified workshop about acquiring the tools.
To remove the jack:
Remove the storage door by pressing the two release tabs simultaneously.
Turn the jack lever in a counter-clockwise direction, and then remove the jack slowly.
When storing the jack, set the jack slowly back, then turn the jack lever in a clockwise direction until the jack is fixed.
Do not touch floor metal directly. Doing so could result in any burns.
When removing the jack, be careful that your hands do not hit against the vehicle. Otherwise, this could result in personal injury.
When removing or storing the jack, be careful not to drop it in the storage area. It may damage the surrounding parts, etc. If you drop it, have the vehicle checked by a NISSAN dealer or qualified workshop.
When storing the jack, do not overtighten the jack lever using a screw driver. Doing so could cause deformation of the installation area for the jack.
Do not allow the jack to contact the interior parts. Doing so could cause damage to the vehicle.