Nissan X-Trail e-POWER 2023 Owners Manual
11.6.2.1. Vehicle set-up
Park the vehicle on a level surface and apply the parking brake.
Run the engine until it reaches the operating temperature.
Turn the engine off and wait more than 10 minutes.
Raise and support the vehicle using a suitable floor jack and safety jack stands.
Place the safety jack stands under the vehicle jack-up points.
A suitable adapter should be attached to the jack stand saddle.
Remove the engine undercover.
Remove clips at the around of the undercover.
Then remove the other bolts that hold the undercover in place.
Make sure the correct lifting and support points are used to avoid vehicle damage.
Owners Manual