Nissan X-Trail e-POWER 2023 Owners Manual
4.1.2.4. Walk-in mechanism (Three row model)
The second row seats can tilt and slide for easy entry/exit to/from the third row seats.
After operating the walk-in mechanism, be sure to return the seat to the rearmost position and then tilt up the seatback until it latches.
When operating the walk-in mechanism, push and hold the seatback and operate slowly. If the seatback is tilted down quickly and then allowed to slide, there is a risk that it could contact your face or other parts of your body, or pinch your hand or foot, causing injury.
When operating the walk-in mechanism, be sure not to contact any moving parts to avoid possible injuries and/or damage.
When operating the walk-in mechanism, be sure that the second row seats are not occupied by passengers and/or any objects to avoid possible injuries and/or damage.
Do not operate the walk-in mechanism with objects, drinks, etc. on the seat. This may cause objects to break or cause the passenger room to be soiled.
Pull the lever (1) to tilt down the seatback.
Slide the seat forward.
When returning the seat to its original position, slide the seat backward, tilt the seatback up and then secure it in place.