Nissan ARIYA 2024 Owners Manual
6.7.1.1. For models with ultrasonic sensor
How to activate system
Close all windows and sunroof (where fitted).
Place the power switch in the OFF position.
Carry the Intelligent Key with you and get out of the vehicle.
Make sure the bonnet and the liftgate are closed. Close and lock all doors with the Intelligent Key, the lock sensor (on the front door handles) or the request switch.
If the bonnet is open, the buzzer will sound. The buzzer will stop when the bonnet is correctly closed.
Even when the driver and/or passengers are in the vehicle, the system will activate with all doors locked and the power switch off. Place the power switch in the ON position to turn the system off.
If the system malfunctions, the short beep sounds 5 times or the hazard indicator blinks for about 10 seconds when the system is activated. Have the system checked by a NISSAN certified electric vehicle dealer.
Theft warning system operation
The warning system will give the following alarm:
The hazard indicator lights blink and the horn sounds intermittently for approximately 30 seconds.
The alarm automatically turns off after approximately 30 seconds. However, the alarm reactivates if the vehicle is tampered with again.
The alarm is activated when:
operating the door or the liftgate without using the Intelligent Key, the capacitive unlock sensor (on the front door handles) or the request switch.
opening the bonnet (where fitted).
the volumetric sensing system (ultrasonic sensor) is triggered (when it is activated).
the power supply is disconnected.
How to stop alarm
The alarm will stop by unlocking a door with the capacitive unlock sensor, the request switch or the UNLOCK
button on the Intelligent Key.The alarm will stop if the power switch is placed in the ON position.
Operation of the ultrasonic sensor
The ultrasonic sensor (volumetric sensing), detects movement in the passenger’s compartment. When the theft warning system is set to the armed position, it will automatically switch on the ultrasonic sensor.
It is possible to exclude the ultrasonic sensor (for example, when transporting the vehicle on a ferry).
To exclude the ultrasonic sensor:
Push the
button until [Settings] appears in the vehicle information display and then push the scroll dial. Use the scroll dial to select [Vehicle Settings]. Then push the scroll dial.Select [Alarm System]. Then push the scroll dial. The following options are available:
[Always ON]
When selected, the ultrasonic sensor will activate each time the alarm is set.
[Ask on Exit]
When selected, the system provides the choice to disable the ultrasonic sensor after the power switch is placed in the OFF position.
[Disable Once]
When selected, the ultrasonic sensor will be disabled until the next time the power switch is placed in the ON position.
Select [Disable Once] or [Ask on Exit]. Then push the scroll dial.
Close the doors, bonnet and liftgate. Lock them using the Intelligent Key, the lock sensor or the request switch.
The ultrasonic sensor is now excluded from the theft warning system. All other functions of the system remain activated until the theft warning system is disarmed again.