Nissan ARIYA 2024 Owners Manual

7.5.4. Garage mode system (where fitted)

The liftgate can be set to open to a specific height by performing the following:

  1. Open the liftgate.

  2. Pull the liftgate down to the desired position and hold the liftgate (the liftgate will have some resistance when being manually adjusted).

  3. While holding the liftgate in position, press and hold the power liftgate close and lock switch (D) located on the liftgate for approximately 3 seconds or until 2 beeps are heard.

The liftgate will open to the selected position setting. To change the position of the liftgate, repeat steps 1-3 for setting the position of the liftgate.

image

Do not set the height of the liftgate below approximately 1/3 of the way to the floor using garage mode. Even if you set the height below approximately 1/3 of the way to the floor, the height will automatically be set to approximately 1/3 of the way to the floor.

Parent topic: