Nissan ARIYA 2024 Owners Manual

4.3.2.5. How to start a normal charge

  1. Push the park button to place the vehicle in the P (Park) position, and apply the parking brake.

  2. Place the power switch in the OFF position.

  3. The charge port lid is linked to the door locking mechanism of the vehicle.

    image

    To open the charge port lid, unlock the doors (see

    ) and push the rear part of the lid as illustrated.
    image
    • A)NISSAN Mode 3 cable
    • B)NISSAN EVSE (Mode 2 cable)*
    • Plug
    • Cap (where fitted)
    • Domestic plug
    • Control box** (indicator lights)

    *: The storage location differs depending on the models.

    **: You can pass a rope through the holes (C) on the control box in order to hang it up while the Li-ion battery is charging.

  4. Model with NISSAN EVSE: Connect the domestic plug to the dedicated electrical outlet.

    If it is connected normally, the green light on the EVSE control box indicator light illuminates. See

    .

    Model with NISSAN Mode 3 cable: Remove the cap (where fitted) from the plug and connect the plug to the charging station electric vehicle socket-outlet.

  5. Open the normal charge port cap. See

    .
    image
  6. Remove the cap (where fitted) from the normal charge connector.

    image
  7. Connect the charge connector to the charge port. If it is connected normally, a beep will sound once.

    image

    A beep will not sound if the vehicle is in the sleep mode. This is normal.

  8. If charging has started, or if the Li-ion battery is waiting for the charging timer to start, a beep will sound twice and the charging status indicator light will operate. See

    .
image

When the vehicle detects that the charge connector is not connected correctly, an alarm sounds for 30 seconds and the charging status indicator light flashes in red. (See

.)

In that case, insert the connector correctly. If the indicator's flashing has been finished, disconnect it once and then reconnect it.

If the connector lock pin is activated before the charge connector has been correctly connected, you cannot connect the charge connector. In that case, once lock the vehicle's door and then unlock it to deactivate the connector lock pin.

Parent topic: