Nissan ARIYA 2024 Owners Manual
8.6.6. Intelligent Around View Monitor system limitations
Listed below are the system limitations for Intelligent Around View Monitor. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death.
Do not use the Intelligent Around View Monitor with the outside mirrors in the stored position, and make sure that the liftgate is securely closed when operating the vehicle using the Intelligent Around View Monitor.
The apparent distance between objects viewed on the Intelligent Around View Monitor differs from the actual distance.
The cameras are installed on the front grille, the outside mirrors and above the rear number plate. Do not put anything on the cameras.
When washing the vehicle with high pressure water, be sure not to spray it around the cameras. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock.
Do not strike the cameras. They are precision instruments. Doing so could cause a malfunction or cause damage resulting in a fire or an electric shock.
There are some areas where the system will not show objects and the system does not warn of moving objects. When in the front or the rear view display, an object below the bumper or on the ground may not be viewed (1). When in the bird’s-eye view, a tall object near the seam (2) of the camera viewing areas will not appear in the monitor.
The following are operating limitations and do not represent a system malfunction:
There may be a delay when switching between views.
When the temperature is extremely high or low, the screen may not display objects clearly.
When strong light directly shines on the camera, objects may not be displayed clearly.
The screen may flicker under fluorescent light.
The colours of objects on the Intelligent Around View Monitor may differ somewhat from the actual colour of objects.
Objects on the Intelligent Around View Monitor may not be clear and the colour of the object may differ in a dark environment.
There may be differences in sharpness between each camera view of the bird’s-eye view.
Do not use wax on the camera lens. Wipe off any wax with a clean cloth that has been dampened with a diluted mild cleaning agent, then wipe with a dry cloth.