Nissan ARIYA 2024 Owners Manual
8.7.1. MOD system operation
The MOD system will turn on automatically under the following conditions:
When the shift lever is in the R (Reverse) position.
When the CAMERA button is pushed to activate the Intelligent Around View Monitor system on the display.
When vehicle speed decreases below approximately 8km/h (5 MPH).
The MOD system operates in the following conditions when the camera view is displayed:
When the shift lever is in the P (Park) or N (Neutral) position and the vehicle is stopped, the MOD system detects the moving objects in the bird’s-eye view. The MOD system will not operate if either door is opened. If outside mirrors are folded, MOD may not operate properly.
When the shift lever is in the D (Drive) position, and the vehicle speed is below approximately 8km/h (5MPH), the MOD system detects moving objects in the front view or front-wide view.
When the shift lever is in the R (Reverse) position and the vehicle speed is below approximately 8km/h (5MPH), the MOD system detects moving objects in the rear view or rear-wide view. The MOD system will not operate if the liftgate is open.
The MOD system does not detect moving objects in the front-side view. The MOD icon is not displayed on the screen when in this view.
When the MOD system detects a moving object near the vehicle, the yellow frame will be displayed on the view where the object is detected and a chime will sound once. While the MOD system continues to detect moving objects, the yellow frame continues to be displayed.
While the RCTA chime is beeping, the MOD system does not chime.
The screen layout in the illustration is for the Left-Hand Drive (LHD) model.
For the Right-Hand Drive (RHD) model, the screen layout will be opposite.
In the bird’s-eye view, the yellow frame (1) is displayed on each camera image (front, rear, right, left) depending on where moving objects are detected.
The yellow lines (2) are displayed on the front view, rear view, front-wide view and rear-wide view.
A green MOD icon (3) is displayed in the view where the MOD system is operative. A grey MOD icon (3) is displayed in the view where the MOD system is not operative.
If the MOD system is turned off, the MOD icon (3) is not displayed.