Nissan ARIYA 2024 Owners Manual

9.1.1.2. TPMS resetting

To keep the TPMS functioning properly, the reset operation must be performed in the following cases.

  • when the tyre pressure is adjusted

  • when a tyre or a wheel is replaced

  • when the tyres are rotated

Perform the following procedures to reset the TPMS.

  1. Park the vehicle in a safe and level place.

  2. Apply the parking brake and push the park button on the shift lever to engage the P (Park) position.

  3. Adjust the tyre pressure on all four tyres to the recommended COLD tyre pressure shown on the tyre placard. Use a tyre pressure gauge to check the tyre pressure.

  4. Place the power switch in the ON position.

    image
  5. Press the image image button (1) until [Settings] appears.

  6. Use the scroll dial (2) until [Tyre Pressures] is selected, and press the scroll dial (2).

  7. Use the scroll dial (2) until [Calibrate] is selected, and press the scroll dial (2).

  8. Use the scroll dial (2) until [Yes] is selected, and press the scroll dial (2) to reset the TPMS.

  9. After resetting the TPMS, drive the vehicle for several minutes at speeds above 25 km/h (16 MPH).

If the low tyre pressure warning light illuminates after the resetting operation, it may indicate that the TPMS is not functioning properly. Have the system checked by a NISSAN certified electric vehicle dealer.

For information regarding the low tyre pressure warning light, see

.
Parent topic: