Nissan ARIYA 2023 Owners Manual
6.5.6.8. [Vehicle Settings]
The [Vehicle Settings] allows user to change settings for the following menus.
[Power Back Door] (where fitted)
[Lighting]
[Locking]
[Wipers]
[Alarm System] (where fitted)
[Driving Position] (where fitted)
[Mirror Fold]
The [Vehicle Settings] can be changed using the scroll dial (1).
[Power Back Door] (where fitted)
This allows user to turn the power liftgate ON or OFF.
[Lighting]
The [Lighting] menu has the following options:
[Welcome Light]
Allows user to turn this feature ON or OFF.
[Mood Lighting]
Allows user to adjust the illuminance.
[Ambient Lighting]
Allows user to adjust the illuminance.
[Locking]
The [Locking] menu has the following options:
[I-Key Door Lock]
When this item is turned on, the lock or capacitive unlock sensors (on the front door handles) and the request switch are activated.
[Selective Unlock]
When this item is turned on, only the corresponding door is unlocked when using the capacitive unlock sensor on the driver's door handle or the request switch. All the doors can be unlocked if the capacitive unlock sensor or the request switch is used again within 5 seconds. When this item is turned to off, all the doors will be unlocked when using the capacitive unlock sensor or the request switch once.
If the approach unlock function is activated while the selective unlock function is turned on, the selective unlock function is deactivated automatically. If the selective unlock function is activated while the approach unlock function is turned on, the approach unlock function is deactivated automatically.
[Auto Door Unlock] (where fitted)
This feature allows user to customise the auto door unlock options.
Use the scroll dial to change the mode.
[Shift to Park]
[Power OFF]
[OFF]
[Walk Away Lock]
This allows user to turn the walk away lock function ON or OFF. (See
.)[Approach Unlock]
This allows user to turn the approach unlock function ON or OFF. (See
.)If the approach unlock function is activated while the selective unlock function is turned on, the selective unlock function is deactivated automatically. If the selective unlock function is activated while the approach unlock function is turned on, the approach unlock function is deactivated automatically.
[Wipers]
The [Wipers] menu has the following options:
[Speed Dependent]
The [Speed Dependent] feature can be activated or deactivated.
[Auto Wipe]
Allows user to turn this feature ON or OFF.
[Reverse Link]
The [Reverse Link] wiper feature can be set to be ON or OFF.
[Alarm System] (where fitted)
Allows user to customise the theft warning system options.
[Always ON]
When selected, the ultrasonic sensor will activate each time the alarm is set.
[Ask on Exit]
When selected, the system provides the choice to disable the ultrasonic sensor after the power switch is placed in the OFF position.
[Disable Once]
When selected, the ultrasonic sensor will be disabled until the next time the theft warning system is disarmed.
(See
.)[Driving Position] (where fitted)
[Exit Seat Slide]
This allows user to turn this feature ON or OFF. (See
.)[Exit Steering]
This allows user to turn this feature ON or OFF. (See
.)
[Mirror Fold]
Allows user to select an item below.
[Auto Fold Off]
[Unfold at Power on]
[Unfold at Unlock]