Nissan Juke 2022-present Owners Manual
4.2 4.2 inch display
1. Blank screen
The blank screen can be selected when the driver does not want see any information on the trip computer screen.
2. [Speed] and [Average] speed (km/h or MPH)
The (digital) speed shows the current speed at which the vehicle is travelling.
The average speed mode shows the average vehicle speed since the last reset. Push the <OK> switch for longer than 1 second to reset.
The display is updated every 30 seconds. The first 30 seconds after a reset, the display shows [–––].
3. Elapsed [Time] and trip [Distance] (km or mile)
Elapsed [Time]: The elapsed time mode shows the time since the last reset. Push the <OK> switch for longer than 1 second to reset. (The trip odometer is also reset at the same time.)
Trip [Distance]: The trip odometer mode shows the total distance the vehicle has been driven since the last reset. Push the <OK> switch for longer than 1 second to reset. (The elapsed time is also reset at the same time.)
4. [Fuel Economy] (l (litre)/100 km, km/l (litre) or MPG)
Current fuel consumption: The current fuel consumption mode shows the current fuel consumption.
Average fuel consumption: The average fuel consumption mode shows the average fuel consumption since the last reset. Push the <OK> switch for longer than 1 second to reset.
The display is updated every 30 seconds. For about the first 500 m (1/3 mile) after a reset, the display shows [–––].
5. Navigation (where fitted)
When the route guidance is set in the navigation system, this item shows the navigation route information.
For more details, see the separately provided NissanConnect Owner's manual.
6. [Traffic Sign] Recognition (TSR) (where fitted)
The Traffic Sign Recognition (TSR) system provides the driver with information about the most recently detected speed limit.
For more details, see
.7. Audio
The audio mode shows the status of audio information.
For more details, see
or the separately provided NissanConnect Owner's manual.8. [Driver Assistance] (where fitted)
The driving aids mode shows the operating condition for the following systems.
Lane Departure Warning (LDW)
Intelligent Lane Intervention/Lane Departure Prevention (LDP)
Intelligent Emergency Braking (IEB)
For more details, see
, and/or .9. [Tyre Pressures] (where fitted)
The tyre pressure mode shows the pressure of all four tyres. The displayed values are only available while the vehicle is being driven.
When the [Low Tyre Pressure Add Air] warning appears, the display can be switched to the tyre pressure mode by pushing the <OK> switch to reveal additional details on the displayed warning.
10. [Stop / Start] (where fitted)
Stop/Start mode shows the status of the stop/start system. For more details, see
.