Nissan Juke 2022-present Owners Manual
Intelligent Intelligent Blind Spot Intervention system operation
- (1)Steering wheel mounted controls (left)
- (2)BSW LED indicator on the door mirror glass (where fitted)
- (3)Drive Assist indicator (where fitted) or ProPILOT status indicator light (where fitted) in the vehicle information display
- (4)BSW indicator
- (5)Steering wheel mounted controls (right)
- (6)ProPILOT switch (for models with ProPILOT or Drive Assist switch (for models without ProPILOT)
- (7)Speed limiter switch
If the radar sensors detect vehicles in the detection zone, the BSW LED indicator light located on the outside mirrors illuminates. If your vehicle is approaching a lane marker, the system chimes a sound (three times) and the BSW LED indicator light flashes. Then the system applies the brakes on one side of the vehicle for a moment to help return the vehicle back to the centre of the lane. Intelligent Blind Spot Intervention operates regardless of turn signal usage.
Warning and brake control will only be activated if the BSW LED indicator light is already illuminated when your vehicle approaches a lane marker. If another vehicle comes into the detection zone after your vehicle has crossed a lane marker, no warning or brake control will be activated. For additional information, see
. The Intelligent Blind Spot Intervention system is typically activated earlier than the Lane Departure Prevention (LDP) system when your vehicle is approaching a lane marker.The Intelligent Blind Spot Intervention system turns on when either the ProPILOT switch (for models with ProPILOT), the Drive Assist switch (for models without ProPILOT) or the speed limiter switch on the steering wheel is pushed when the [Blind Spot Intervention] is enabled in the [Driver Assistance] menu in the vehicle information display.
The ProPILOT status indicator light (for models with ProPILOT) or Drive Assist indicator (for models without ProPILOT) on the vehicle information display illuminates.
The Intelligent Blind Spot Intervention system provides a chime and turns on or flashes the BSW LED indicator light even if the BSW system is off.