Nissan Juke 2022-present Owners Manual
Operating Operating the ProPILOT system
Push the ProPILOT switch (5). This turns on the ProPILOT system and displays the status of the ProPILOT system on the Vehicle Information Display.
Accelerate or decelerate your vehicle to the desired speed.
Push the <SET-> switch. The ProPILOT system begins to automatically maintain the set speed. The ProPILOT activation indicator and ProPILOT status indicators illuminate (blue), ICC status indicator and set speed illuminate green.
When a vehicle ahead is travelling at a speed of 30 km/h (20 MPH) or below and the <SET> switch is pushed, the set speed of your vehicle is 30 km/h (20 MPH).
Turning the ProPILOT system on will turn on the Intelligent Lane Intervention (ILI) system and Intelligent Blind Spot Intervention system at the same time, providing those systems are enabled in the [Driver Assistance] menu in the vehicle information display. For additional information, refer to
and .When the <SET-> switch is pushed under the following conditions, the ProPILOT system cannot be set and the set vehicle speed indicators blinks for approximately 2 seconds:
When travelling below 30 km/h (20 MPH) and the vehicle ahead is not detected
When the shift lever is not in the D (Drive) position or Manual mode
When the parking brake is applied
When the brakes are operated by the driver
When the ESP system is off. For additional information, refer to
.When the ESP system (including the traction control system) is operating
When a wheel is slipping
When any door is open
When the driver's seat belt is not fastened