Nissan Juke 2022-present Owners Manual
Rear-view Rear-view monitor (where fitted)
- (1)Display
- (2)Camera
When the shift lever is moved into the R (Reverse) position, the monitor (NissanConnect display) shows the view from the rear of the vehicle.
The system is designed as an aid to the driver in detecting large stationary objects. It is intended to help avoid damaging the vehicle when reversing. However, the system will not detect small objects below the bumper and may not detect objects close to the bumper or on the ground.
Failure to follow the warnings and instructions for proper use of the rear-view monitor could result in serious injury or death.
The rear-view camera is a convenience but it is not a substitute for proper reversing. Always turn and look out the windows, and check mirrors to be sure that it is safe to move before operating the vehicle. Always reverse slowly.
The system cannot completely eliminate blind spots.
Underneath the bumper and the corner areas of the bumper cannot be viewed on the rear-view monitor because of its monitoring range limitation.
Objects viewed in the rear-view monitor differ from the actual distance because a wide-angle lens is used.
Do not put anything on the rear-view camera. The rear-view camera is installed above the number plate.
Objects in the rear-view monitor will appear visually opposite than when viewed in the rear view and outside mirrors.
Make sure that the tailgate is securely closed when reversing.
When washing the vehicle with high pressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing possibly water condensation on the lens, a malfunction, a fire or an electric shock.
There is a transparent cover over the camera lens. Do not scratch the cover when cleaning dirt or snow from it.