Nissan Juke 2022-present Owners Manual
System System maintenance
The sensor (A) is located behind the front bumper.
The camera (B) is located on the upper side of the windscreen.
NISSAN recommends only to use frameless type number plate holders.
The Intelligent Emergency Braking system may not function properly if the number plate is placed in a frame as illustrated.
Please contact a NISSAN dealer or qualified workshop for advice.
The sensor for the Intelligent Emergency Braking system (A) is located behind the lower grille of the front bumper.
To keep the Intelligent Emergency Braking system operating properly, be sure to observe the following:
Always keep the sensor area of the front bumper clean.
Do not strike or damage the areas around the sensor.
Do not cover or attach stickers or similar objects on the front bumper near the sensor area. This could cause failure or malfunction.
Do not attach metallic objects near the sensor area (brush guard, etc.) This could cause failure or malfunction.
Do not alter, remove, or paint the front bumper. Before customising or restoring the front bumper, please contact a NISSAN dealer or qualified workshop.
Do not place the number plate in a frame.
For the radio approval numbers and information, see
.