Nissan Juke 2024 Owners Manual
5.9.1.1. Activation of the Automatic brake hold function
With the ignition switch in the ON position, push Automatic brake hold switch (1). The indicator light of Automatic brake hold switch (2) illuminates.
When Automatic brake hold function goes into standby, Automatic brake hold indicator light (white) illuminates.
To use Automatic brake hold function, the following conditions need to be met:
The driver's seat belt is fastened.
The electronic parking brake is released.
The vehicle is not in the P (Park) position (Automatic (DCT) Transmission models).
The vehicle is not stopped on a steep hill.
Automatic brake hold function retains the last state until the driver changes the option even if the ignition switch is turned off.
Owners Manual