Nissan Juke 2024 Owners Manual
5.6. Bonnet
Pull the bonnet lock release lever (1), located below the left side of the instrument panel, the bonnet will spring up slightly.
Push the lever (2) , at the front of the bonnet, to the left with your fingertips and raise the bonnet.
Insert the support rod (3) into the slot on the frame behind the headlight unit.
When closing the bonnet, replace the support rod in its original position, then lower the bonnet to a height of approximately 200 mm (8 inches) above the closed position and drop. Make sure it locks into place.
Always check whether the bonnet is closed and locked securely to prevent it from opening while driving. The vehicle should only be operated with the bonnet securely closed.
Owners Manual