Nissan Juke 2024 Owners Manual

7.23.2. How to enable/disable the Intelligent Driver Alertness system warning

image
  • Steering-wheel-mounted control (left side)
  • Vehicle information display

Perform either of the following steps to enable or disable the Intelligent Driver Alertness system.

Shortcut Menu

Type A

The Intelligent Driver Alertness system can be turned ON/OFF using [Driver Assist Custom] and [Custom Mode Setup].

Type B

The Intelligent Driver Alertness system can be turned ON/OFF using the Shortcut menu. Select [Driver Assistance] and select [Driver Attention Alert] and push <OK>.

Refer to

for more details.

Settings

When [Driver Assist Custom] setting is ON, Driver Attention Alert cannot be adjusted through the [Settings] menu. To adjust Driver Attention Alert setting when [Driver Assist Custom] is ON, go to the [Custom Mode Setup] menu in the [Shortcut Menu].

  1. Use the image or image button on the steering wheel until [Settings] is shown on the Vehicle Information Display.

  2. Use the image or image button to select [Driver Assistance]. Then push <OK>.

  3. Select [Driver Attention Alert] and push <OK>.

image
  • Type A

    Intelligent Driver Alertness system will automatically be turned on when the engine is restarted.

  • Type B

    The setting will be retained even if the engine is restarted.

  • As long as the Steering Assist system (where fitted) or ProPILOT Assist system (where fitted) is activated the Intelligent Driver Alertness system will be deactivated. Turning off the Steering Assist or ProPILOT system reactivates the Intelligent Driver Alertness system.

Parent topic: