Nissan Juke 2024 Owners Manual
6.2.1. How to read the displayed lines
Use the displayed lines as a reference. The lines are highly affected by the number of occupants, fuel level, vehicle position, road condition and road grade. Always check with your eyes directly around the vehicle while reversing.
The distance guide line and the vehicle width line should be used as a reference only when the vehicle is on a level paved surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displayed objects.
When reversing the vehicle up a hill, objects viewed in the monitor are further than they appear. When reversing the vehicle down a hill, objects viewed in the monitor are closer than they appear. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.
The lines which are displayed on the monitor, indicate the vehicle's clearance and distance between the obstacle and the bumper (A).
Displayed lines indicate the distances between the obstacle and the bumper as follows:
(1) 0.5 m (1.5 ft) – red
(2) 1 m (3 ft) – blue
(3) 2 m (7 ft) – blue
(4) 3 m (10 ft) – blue
Vehicle width guide lines (5) :
Indicate the vehicle width when reversing.
Predictive course lines (6) :
Indicate the predictive course when reversing. The predictive course lines will be displayed on the monitor when the vehicle is in the R (Reverse) position and if the steering wheel is turned. The predictive course lines will move depending on how much the steering wheel is turned and will not be displayed while the steering wheel is in the straight ahead position.
The vehicle width guide lines and the width of the predictive course lines are wider than the actual width and course.