Nissan Juke 2024 Owners Manual
7.21.6.5. ICC sensor maintenance
The radar sensor is located on the front of the vehicle (A).
NISSAN recommends only to use frameless type number plate holders.
The ICC system may not function properly if the number plate is placed in a frame as illustrated.
Please contact a NISSAN dealer or qualified workshop for advice.
The sensor for the ICC system (A) is located behind the lower grille of the front bumper.
To keep the ICC system operating properly, be sure to observe the following:
Always keep the sensor area of the front bumper clean.
Do not strike or damage the areas around the sensor.
Do not cover or attach stickers or similar objects on the front bumper near the sensor area. This could cause failure or malfunction.
Do not attach metallic objects near the sensor area (brush guard, etc.) This could cause failure or malfunction.
Do not alter, remove, or paint the front bumper. Before customising or restoring the front bumper, please contact a NISSAN dealer or qualified workshop.
Do not place the number plate in a frame.
Before customizing or restoring the front bumper, it is recommended that you visit a NISSAN dealer or qualified workshop.
For the radio approval numbers and information, see
.The camera sensor is located above the inside mirror.
To keep the proper operation of the systems and prevent a system malfunction, be sure to observe the following:
Always keep the windscreen clean.
Do not attach a sticker (including transparent material) or install an accessory near the camera unit.
Do not place reflective materials, such as white paper or a mirror, on the instrument panel. The reflection of sunlight may adversely affect the camera unit's capability of detecting the lane markers.
Do not strike or damage the areas around the camera unit. Do not touch the camera lens or remove the screw located on the camera unit.
If the camera unit is damaged due to an accident, have it checked by a NISSAN dealer or qualified workshop.