Nissan Juke 2024 Owners Manual
7.21.9. ProPILOT Assist Speed limiter (where fitted)
The speed limiter allows you to set the desired vehicle speed limit. While the speed limiter is activated, you can perform normal braking and acceleration, but the vehicle will not exceed the set speed.
When the vehicle reaches the set speed limit or if the set speed limit is lower than the actual vehicle speed, the accelerator pedal will not work until the vehicle speed drops below the set speed limit.
When the actual vehicle speed exceeds the set speed, an audible warning will be heard a short time after the set speed is exceeded and driver intervention is not detected.
When the speed limiter is on the cruise control system cannot be operated.
The speed limiter will not automatically brake the vehicle to the set speed limit.
Always observe posted speed limits. Do not set the speed above them.
Always confirm the setting status of the speed limiter in the Vehicle Information Display.
When the speed limiter is set, avoid hard acceleration to reach the set limit to ensure that the system can limit the speed of the vehicle correctly.
When additional floor mats are used, be sure that they are correctly secured and that they cannot interfere with the accelerator pedal. Mats not adapted to the vehicle may prevent proper operation of the speed limiter.
The speed limiter operation switches are located on the steering wheel (right hand side).
The speed limiter operating condition is shown on the top of Vehicle Information Display. For details, see
.