Nissan Juke 2024 Owners Manual
4.12. Seat heating (where fitted)
The seats can be warmed by built-in heaters. The switches (1) and (2) located on the heater and air conditioning unit can be operated independently of each other.
Start the engine.
Select heat range.
For high heat, push the button once (both indicator lights will illuminate).
For low heat, push the button again (one indicator light will illuminate).
To turn off the heater, push the button again. Make sure the indicator lights turns off.
The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on.
When the vehicle’s interior is warmed, be sure to turn off the switch(es).
The battery could run down if the seat heater is operated while the engine is not running.
Do not use the seat heater for extended periods or when no one is using the seat.
Do not put anything on the seat which insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat may become overheated.
Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the seat heater.
Any liquid spilled on the heated seat should be removed immediately with a dry cloth.
When cleaning the seat, never use petrol, thinner, or any similar materials.
If any malfunctions are found or the heated seat does not operate, turn the switch off and have the system checked by a NISSAN dealer or qualified workshop.