Nissan Juke 2024 Owners Manual
7.13.2.7. Shift lock release
- Console finisher
- Shift lock release button
If the battery charge is low or discharged, the shift lever may not move from the P (Park) position even with the brake pedal depressed and the shift lever button pushed.
To move the shift lever, perform the following procedure:
Models with Intelligent Key system:
Place the ignition in the OFF or LOCK position.
Models without Intelligent Key system:
Place the ignition in the LOCK position, and remove the key if it is inserted.
Apply the parking brake.
Using a suitable tool, unclip and lift up the console finisher ring (1).
Push down the shift lock release button (2). Use a suitable tool if necessary.
Push and hold the shift lever button and move the shift lever to the N (Neutral) position while holding down the shift lock release button.
Place the ignition in the ON position to unlock the steering wheel. The vehicle may be moved to the desired location.
For models with Intelligent Key system: If the battery is discharged completely, the steering wheel cannot be unlocked. Do not move the vehicle with the steering wheel locked.
If the shift lever cannot be moved out of the P (Park) position, have a NISSAN dealer or qualified workshop check the Automatic transmission (DCT) system as soon as possible.
If the shift lever cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the brake lights may not work. Malfunctioning brake lights could cause an accident injuring yourself and others.