Nissan Juke 2024 Owners Manual
7.21.5.4. Steering Assist Activation/Deactivation
Use the following methods to enable or disable the Steering Assist.
Steering Assist switch
To turn the Steering Assist ON or OFF, push the Steering Assist switch on the instrument panel.
When the Steering Assist switch is used to turn the system ON or OFF, the system remembers the setting between power cycles. The switch must be pushed again to change the setting to ON or OFF.
The Steering Assist switch changes the status of the [Steering Assist] selection made in the [Settings] screen in the Vehicle Information Display.
Setting in the Vehicle Information Display
Press the
or 
buttons on the steering wheel until the [Settings] menu is displayed in the Vehicle Information Display and press the <OK> button.Use the
and 
buttons on the steering wheel to highlight [Driver Assistance] and press the <OK> button.With [Steering Assist] highlighted press the <OK> button to toggle the Steering Assist system status.
If the indicator is displayed, the system is ON.
When the ProPILOT Assist screen is displayed on the Vehicle Information Display, press the <OK> button on the steering wheel to show the [Driver Assistance] setting menu.
When enabling/disabling the system through the Vehicle Information Display or when pressing the Steering Assist switch, the system retains the current settings even if the system is restarted.