Manuals

Nissan Juke 2024 Owners Manual

4.3.2.6. [Tyre Pressures]

The settings in the Tyre pressures menu are all related to the Tyre Pressure Monitoring System TPMS (see

Tyre Pressure Monitoring System (TPMS) (where fitted)
).

  • [Target Front]

  • [Target Rear]

  • [Tyre Pressure Unit]

  • [Calibrate]

[Target Front]

The [Target Front] tyre pressure is the pressure specified for the front tyres on the tyre placard (see

Tyre placard
and
Tyre Pressure Monitoring System (TPMS) (where fitted)
).

[Target Rear]

The [Target Rear] tyre pressure is the pressure specified for the rear tyres on the tyre placard (see

Tyre placard
and
Tyre Pressure Monitoring System (TPMS) (where fitted)
).

[Tyre Pressure Unit]

The unit for tyre pressure that displays in the Vehicle Information Display can be changed to:

  • kPa

  • bar

  • kgf/cm2

  • psi

Use the image or image and the <OK> buttons to select and change the unit.

Pressure units conversion table

kPa

psi

bar

kgf/cm2

200

29

2.0

2.0

210

30

2.1

2.1

220

32

2.2

2.2

230

33

2.3

2.3

240

35

2.4

2.4

250

36

2.5

2.5

250

36

2.5

2.5

260

38

2.6

2.6

270

39

2.7

2.7

280

41

2.8

2.8

290

42

2.9

2.9

300

44

3.0

3.0

310

45

3.1

3.1

320

46

3.2

3.2

330

48

3.3

3.3

340

49

3.4

3.4

[Calibrate]

The tyre pressure is affected by the temperature of the tyre; the tyre temperature increases when the vehicle is driven. The TPMS system uses temperature sensors in the tyres to compensate for changes in temperature in order to prevent false TPMS warnings.

The [Calibrate] function resets the previously stored temperature value. It is recommended that this function is performed after the tyre pressures are adjusted.

See

Tyre Pressure Monitoring System (TPMS) (where fitted)
.

Use the image or image and the <OK> buttons to start or cancel the calibration process. While the calibration process is active, the message: [Calibrate] will be displayed.

Parent topic:
Settings