Nissan Juke 2024 Owners Manual
4.3.1.1. Vehicle Information Display
When the ignition is switched ON, the vehicle information display may display the following screens if the vehicle is equipped with them:
1. [Home]
2. [Blank]
3. [Drive Computer] — [Average Speed] (Distance & Time)
4. [Fuel Economy]
5. [Speed]
6. [Tyre Pressures]
7. [Stop/Start]
8. [Stop/Start]
9. [Chassis Control]
10. Navigation (where fitted)
11. Navigation
12. Compass (where fitted)
13. Audio
14. Telephone
15. Driving Aids (where fitted)
16. ProPILOT Assist /ICC/ (where fitted)
17. [Traffic sign] (where fitted)
18. [Settings]
Warnings. Warnings will only display if there are any present. For more information on warnings and indicators, see
.
To control what items display in the vehicle information display, see
.Home
The Home mode shows the following information.
Vehicle speed
Navigation (where fitted)
Audio
Blank
Blank display.
Drive Computer
The Drive computer shows the average fuel economy, average vehicle speed, driving time and driving distance. You can switch between [Since Reset], [Since Start] and [Since Refuel] by pushing the <OK> button.
[Since Reset] can be reset manually by pressing the <OK> button for more than 2 secs or until reset page appears.
[Since Start] will reset after 30 minutes from last ignition OFF. It can be also reset manually by pressing the <OK> button for more than 2 secs or until reset page appears.
[Since Refuel] will be reset automatically each time when refuelling and when vehicle speed is greater than 10 km/h (6 MPH) or if vehicle travelled 500m or more. It can be also reset manually by pressing the <OK> button for more than 2 secs or until reset page appears.
Average fuel consumption:
The average fuel consumption shows the average fuel consumption since the last reset.
Average speed:
The average speed shows the average vehicle speed since the last reset.
Trip odometer:
The trip odometer shows the total distance the vehicle has been driven since the last reset.
Elapsed time:
The elapsed time shows the time since the last reset.
Fuel economy display
Current fuel consumption:
The Fuel economy display mode shows the current fuel consumption.
Average fuel consumption:
The Fuel economy display mode shows the average fuel consumption since the last reset.
There are three modes of operation. You can switch between [Since Reset], [Since Start] and [Since Refuel] by pushing the scroll dial.
[Since Reset] can be reset manually by using the scroll dial.
[Since Start] (where fitted) can be reset manually by using the scroll dial , or will be reset automatically each time the ignition is switched OFF.
[Since Refuel] will be reset automatically each time when refuelling and either “Vehicle Speed ≥ 10 km/h” or “vehicle cruised 500m” is satisfied.
Speed
The Speed mode shows the following information.
Vehicle speed
Average Speed
Tyre Pressures
The tyre pressure mode shows the pressure of all four tyres while the vehicle is driven.
When the [Low Tyre Pressure] warning appears, the display can be switched to the tyre pressure mode by pushing the up and down buttons to reveal additional details on the displayed warning.
Stop / Start
Stop / Start
Chassis Control
This mode shows the operating condition of the following systems:
Intelligent Trace Control system
Intelligent Ride Control system
Automatic Brake Hold function
Navigation (where fitted)
When the route guidance is set in the navigation system, this item shows the navigation route information.
Navigation (where fitted)
When this display is selected the map information can be viewed from the navigation system.
Compass (where fitted)
This display indicates the heading direction of the vehicle.
Audio
The audio mode shows the status of the audio system.
Telephone
The telephone mode shows the status of telephone information.
Driver Assistance
The Driver Assistance mode shows the operating condition for the following systems.
Forward:
Intelligent Emergency Braking (IEB) (where fitted)
Blind Spot:
Blind Spot Warning (BSW) (where fitted)
Lane
Lane Assist
If a flashing yellow speaker icon is displayed, it indicates that the system is temporarily unavailable.
ProPILOT Assist (where fitted)
The ProPILOT Assist mode shows the operating conditions for the following systems:
Intelligent Cruise Control (ICC)
Steering Assist
The display will also be shown when the ProPILOT Assist is turned on. For additional information, see
.Traffic Sign Assist (where fitted)
The Traffic Sign Assist (TSA) system provides the driver with information about the most recently detected speed limit. See Traffic Sign Assist (Type A) (where fitted) and Traffic Sign Assist (Type B) (where fitted) for more details.