Nissan Juke Hybrid 2024 Owners Manual
8.10. Starting the hybrid system
Before starting the hybrid system ensure parking brake is applied and vehicle is secure. For additional information, see
.Move the shift lever to the P (Park) position, depress and hold brake pedal while starting the hybrid system.
The starter is designed to operate only when the shift lever is in the proper position.
The Intelligent Key must be carried while inside the vehicle when operating the ignition switch.
To start the hybrid system:
Depress the brake pedal then push the ignition switch. If you try to start hybrid system with the shift lever in N (Neutral) without the footbrake depressed, the hybrid system will not start and a [Shift to Park] message will be displayed in the vehicle information display.
The
indicator is displayed in the vehicle information display.
If it becomes necessary to start the engine with a booster battery and jumper cables, the instructions and cautions contained in the “6. In case of emergency” section should be carefully followed.
After starting, allow the engine to idle for at least 30 seconds to warm-up. Drive at moderate speeds for a short distance first, especially in cold weather.
Do not leave the vehicle unattended while the hybrid system is warming up.
To stop the hybrid system:
Move the shift lever to the P (Park) position, apply the parking brake and push the switch to the “OFF” position.
The steering wheel lock engages when ignition is off and a door is opened or closed.