Nissan LEAF 2023 Owners Manual

9.17.1. Activating the ProPILOT Assist

  1. Push the ProPILOT Assist switch (A). This turns on the ProPILOT Assist system and displays the status of the ProPILOT Assist system on the Vehicle Information Displays (B).

  2. Accelerate or decelerate your vehicle to the desired speed.

  3. Push the <SET-> switch (C). The ProPILOT Assist system begins to automatically maintain the set speed. The ProPILOT Assist activation indicator (D) and ProPILOT Assist status indicators (E) illuminate (blue). When a vehicle ahead is travelling at a speed of 30 km/h (20 MPH) or below and the <SET-> switch is pushed, the set speed of your vehicle is 30 km/h (20 MPH).

image

Turning the ProPILOT Assist system on will turn on the Intelligent Lane Intervention (ILI) system at the same time. For additional information, refer to

.

When the <SET-> switch is pushed under the following conditions, the ProPILOT Assist system cannot be set and the set vehicle speed indicators (1) blinks for approximately 2 seconds:

  • When travelling below 30 km/h (20 MPH) and the vehicle ahead is not detected.

  • When the shift lever is not in the D (Drive) position or manual shift mode.

  • When the parking brake is applied.

  • When the brakes are operated by the driver.

  • When the ESP system is off. For additional information, refer to

    .
  • When the ESP system (including the traction control system) is operating.

  • When a wheel is slipping.

  • When any door is open.

  • When the driver’s seat belt is not fastened.

Parent topic: