Nissan LEAF 2023 Owners Manual
7.3.5. Bonnet
Make sure that the bonnet is completely closed and latched before driving. Failure to do so could cause the bonnet to open during driving and result in an accident.
If steam or smoke is emitting from the motor compartment, do not open the bonnet. Doing so could cause an injury.
When opening the bonnet:
Hold the coated part (A) of the support rod. Avoid direct contact with the metal parts because they may be hot immediately after the electric vehicle system has been stopped.
Pull the bonnet release handle (1) located below the instrument panel. The bonnet will then spring up slightly.
Locate the lever (2) in between the bonnet and charge port lid, and push the lever upward with your fingertips.
Raise the bonnet (3).
Remove the support rod (4) from the bonnet and insert it into the slot (5).
When closing the bonnet:
Before closing the bonnet, make sure to release the support rod and store it in the original position. Otherwise the support rod will be damaged.
While supporting the bonnet, return the support rod to its original position.
Slowly lower the bonnet to about 20 – 30 cm (8 – 12 in.) above the bonnet lock, then let it drop.
Make sure the bonnet is securely latched.