4.3.2.10. How to stop a normal charge with NISSAN EVSE

To stop charging, push the charge connector lock button on the Intelligent Key for more than 1 second or push the charge port lid opener switch.

For type 1:

Ensure that the charge connector lock is not engaged. If the charge connector lock operates, unlock the charge connector.

Remove the charge connector from the charge port. (Type 1: Push the release button on the charge connector to release the lock.)

Attach the safety cap to the normal charge connector.

After closing the cap on the charge port, close the charge port lid.

Remove the plug from the domestic outlet.

Store the charging cables appropriately.

Winding the charge cable in the direction shown in the figure avoids shortening the cable life.

To store the NISSAN EVSE in the bag: Wind the charge cable clockwise against the control box (approximately 30 cm (12 in) in diameter).

If you place the NISSAN EVSE in the vehicle, store it in the storage bag and secure it firmly with the storage net in the luggage compartment. Otherwise, it may become a projectile and cause a personal injury during sudden braking or in a collision.

After closing the cap on the charge port, close the charge port lid.