Nissan LEAF 2023 Owners Manual
7.7.1. Intelligent Rear View Mirror (where fitted)
For further details about the rear-view monitor, see
.
Failure to follow the warnings and instructions for proper use of the Intelligent Rear View Mirror could result in serious injury or death.
The Intelligent Rear View Mirror is a convenience feature but it is not a substitute for proper vehicle operation. The system has areas where objects cannot be viewed. Check the blind spot of the Intelligent Rear View Mirror before vehicle operation. The driver is always responsible for safe driving.
Do not disassemble or modify the Intelligent Rear View Mirror, the camera unit or wiring. If you do, it may result in accidents or fire. In case you notice smoke or smell coming from the Intelligent Rear View Mirror, stop using the system immediately. See a knowledgeable LEAF repairer such as a NISSAN certified electric vehicle dealer for servicing.
Do not operate the Intelligent Rear View Mirror menu while driving. Doing so can be a distraction and you could lose control of your vehicle and cause an accident or serious injury.
Do not gaze into the Intelligent Rear View Mirror display for a prolonged time during driving. It may cause a distraction and you could lose control of your vehicle and cause an accident or serious injury. Gazing into the display screen during driving can also be a cause of carsickness for passengers.
Do not put a cigarette or flames near the Intelligent Rear View Mirror, the camera unit or wiring. It may cause a fire.
Be sure to adjust the Intelligent Rear View Mirror before driving. Switch the system to the conventional rearview mirror mode and be properly seated in the driver’s seat. Then adjust the rearview mirror so as to see the rear window properly. Driving without adjusting the rearview mirror may cause difficulty in viewing the display in Intelligent Rear View Mirror mode (camera view mode) due to the reflection from the surface of the mirror.
If the Intelligent Rear View Mirror malfunctions, immediately switch the system to the conventional rearview mirror mode. Have the system checked by a knowledgeable LEAF repairer such as a NISSAN certified electric vehicle dealer.
When strong light (for example, sunlight or high beams from following vehicles) enters the camera, a light beam or a glaring light may appear on the display screen of the Intelligent Rear View Mirror. In that case, switch the system to the conventional rearview mirror mode appropriately.
If dirt, rain or snow accumulates on the exterior glass surface covering the camera, the Intelligent Rear View Mirror may not display objects clearly. Use of the rear window wiper/washer may improve visibility, but if not, switch the Intelligent Rear View Mirror to the conventional rearview mirror mode until the glass covering the camera can be cleaned.
Components
- (A)Intelligent Rear View Mirror mode indicator
- (1)MENU button
- (2)Left button
- (3)Right button
- (4)Select button
The Intelligent Rear View Mirror provides a clear rear view from a camera located on the rear of the vehicle. The Intelligent Rear View Mirror has two modes: conventional rearview mirror mode and Intelligent Rear View Mirror mode (camera view mode).
When the Intelligent Rear View Mirror mode is selected, the indicator (A) is displayed. (If a malfunction occurs in the Intelligent Rear View Mirror, the indicator (A) will turn off or not appear when the Intelligent Rear View Mirror mode is selected.)
How to change the mode
The mode can be switched when the power switch is in the ON position.
Pull the mode select lever (A) to switch to the Intelligent Rear View Mirror mode (camera view mode).
Push the mode select lever (B) to switch to the conventional rearview mirror mode.
In Intelligent Rear View Mirror mode, if the operation indicator (1) turns off, promptly switch to rearview mirror mode.
If the operation indicator does not light up even when switching again to Intelligent Rear View Mirror mode, the system may be malfunctioning. Please consult a knowledgeable LEAF repairer such as a NISSAN certified electric vehicle dealer.
How to configure settings of Intelligent Rear View Mirror (MENU button operation)
You can choose the display settings of the Intelligent Rear View Mirror such as brightness, camera angle, textual indication [ON] or [OFF], language and backlight of the buttons.
When the Intelligent Rear View Mirror mode is on, the setting menu can be selected by pushing the [MENU] button (1). Each time the [MENU] button (1) is pushed, the setting menu will change as follows.
MENU (initial screen) → [BRIGHTNESS] → [DOWN/UP] → [LEFT/RIGHT] → [ROTATION] → [INDICATION] → [LANGUAGE] → [SWITCH BACKLIGHT] → [LICENSE] → MENU (initial screen)
To switch the image quality adjustment items with the MENU button (1), push the button within 5 seconds after completing the adjustment of the previous item. If 5 seconds or more pass, the display will return to MENU (initial screen).
BRIGHTNESS
The brightness of the display screen can be adjusted.
Push the left button (2) to dim the screen.
Push the right button (3) to brighten the screen.
DOWN/UP
The vertical camera angle of the display screen can be adjusted.
Push the left button (2) to angle the camera down.
Push the right button (3) to angle the camera up.
LEFT/RIGHT
The horizontal camera angle of the display screen can be adjusted.
Push the left button (2) to move the camera angle to the left.
Push the right button (3) to move the camera angle to the right.
ROTATION
The camera angle of the display screen can be rotated.
Push the left button (2) to rotate the camera angle to the left.
Push the right button (3) to rotate the camera angle to the right.
INDICATION
The textual indication can be turned on or off on the Intelligent Rear View Mirror display screen.
Push the left button (2) to disable the textual indication on the display screen.
Push the right button (3) to enable the textual indication on the display screen.
LANGUAGE
The language of the textual indication can be selected on the Intelligent Rear View Mirror display screen.
Select the language by using the (2) or (3) button.
SWITCH BACKLIGHT
For better visibility at night the switches can be lit.
Push the left button (2) to disable the switch backlight.
Push the right button (3) to enable the switch backlight.
LICENSE
Selecting this menu item causes the license information to be displayed.
Intelligent Rear View Mirror system precautions
Long-term use of this system when the EV system is stopped may cause the battery to be discharged.
Do not attach an antenna or wireless device near the Intelligent Rear View Mirror. Electric waves from the wireless device may cause image disturbance in the Intelligent Rear View Mirror.
Do not push buttons excessively or operate the lever roughly this may cause a system failure or damage the Intelligent Rear View Mirror.
Never turn the body of Intelligent Rear View Mirror by 20° or more vertically or 30° or more horizontally. It may damage the Intelligent Rear View Mirror.
Do not apply strong shocks to the body of the Intelligent Rear View Mirror. It may cause a system failure.
Do not apply heavy loads to the camera and camera-cover on the rear of the vehicle. It may cause the camera to be removed or may cause a system failure.
If it is difficult to see the Intelligent Rear View Mirror display screen because of a strong external light, switch the mode to the conventional rearview mirror mode.
Close the sunshade (where fitted) when the Intelligent Rear View Mirror display screen is unclear due to strong external light.
When LED headlights are viewed on the Intelligent Rear View Mirror display, the images may flicker. This is normal.
Due to diffused reflection from the external environment, images on the screen may flicker. This is not a malfunction.
A quickly moving object may not be possible to display on the camera view screen. This is not a malfunction.
The Intelligent Rear View Mirror mode (camera view mode) display is different from the conventional rearview mirror. The perceived distance of objects in the display may differ from the actual distance. Do not solely rely on the Intelligent Rear View Mirror. Always rely on your own operation to avoid accidents.
Immediately after the Intelligent Rear View Mirror is switched from one mode to another, you may have difficulty focusing your eyesight on the image in the mirror/display screen. Be cautious using the Intelligent Rear View Mirror until your eyes get accustomed to the selected mode. If it is necessary to correct eye focusing, the use of multifocal glasses, etc. is recommended.
If the brightness of the camera view display is adjusted to an excessively bright level, it may cause eyestrain while driving. Adjust the brightness properly.
Use the rear window wiper when it rains. If the camera view image is still unclear when the rear window wiper is in operation, check for deterioration of the rear window wiper blade.
When using the rear window wiper, images on the screen may flicker. This is not a malfunction.
Defog the rear window with the defogger when the rear window is fogged up. Use the conventional rearview mirror mode until the rear window is fully defogged.
The display of the Intelligent Rear View Mirror may become hot. This is not a malfunction.
The colour of an object in the distance or in the dark may be difficult to recognise. This is not a malfunction.
Depending on your physical condition, it may take some time for the image in Intelligent Rear View Mirror Mode to come into focus.
Do not block the front of the Intelligent Rear View Mirror. You may not be able to adjust the brightness of the monitor or switch the camera image.
In Intelligent Rear View Mirror Mode, if the Intelligent Rear View Mirror becomes hot, the brightness may decrease or images may not be displayed.
In Intelligent Rear View Mirror Mode, the camera image may be delayed if the Intelligent Rear View Mirror becomes cold.
System maintenance (Intelligent Rear View Mirror)
Always keep the mirror and camera area of the rear window clean.
Clean the mirror and the camera lens with a dry soft cloth.
When cleaning the camera area of the rear window, use a soft cloth dampened with water and a neutral detergent. Then dry it with a dry soft cloth.
If the image on the smart rearview mirror display screen is still unclear even after cleaning the camera area of the rear window, an oil film may be adhering to the rear window glass. Clean the rear window glass with an oil film remover.
Never use alcohol, benzine, thinner, or any similar material to clean the mirror or camera lens. It will cause discoloration, deterioration, or a system malfunction.
Do not attach a sticker (including transparent material) on the camera area of the rear window.