Nissan LEAF 2023 Owners Manual
4.3.2.5. Normal charge with NISSAN Mode 3 cable (Where fitted)
NISSAN Mode 3 cable can be used with normal charging station with EV socket-outlet. Your NISSAN Electric Vehicle dealer can advise regarding the availability of this cable in your country. The NISSAN Mode 3 cable is a dedicated Electric Vehicle charging cable and can be used with compatible public normal charging stations and some versions of the home charging units.
Before starting the charge, carefully read the instructions provided on the normal charging station.
NISSAN Mode 3 cable
- A1Type 2 plug (with male terminal)
- Connect the plug to a normal charging station socket-outlet.
- A2Normal charge connector with release button (with female terminal)
- Connect the normal charge connector to the normal charge port.
- A3Safety cap (where fitted)
- A4Cable
NISSAN Mode3 cable (type 1) specification
Type 2 plug according to IEC62196–2
Type 1 normal charge connector according to IEC62196–2
Current rating: 32A
Voltage rating: 250V
Protection degree (IP): IP24 not mated / IP44 mated
- A1Type 2 plug (with male terminal)
- Connect the plug to a normal charging station socket-outlet.
- A2Normal charge connector (with female terminal)
- Connect the normal charge connector to the normal charge port.
- A3Safety cap (where fitted)
NISSAN Mode3 cable (type 2) specification
Type 2 plug according to IEC62196–2
Type 2 normal charge connector according to IEC62196–2
Current rating: 32A
Voltage rating: 250V
Protection degree (IP): IP24 not mated / IP44 mated
The NISSAN Mode 3 cable does not need the control box on the cable because safety communication is managed directly between the normal charging station and the vehicle.
Do not disassemble, repair, or modify NISSAN Mode3 cable.
Do not touch the electrical terminals of NISSAN Mode3 cable.
Do not allow a child to handle or use the NISSAN Mode3 cable without adult supervision.
Precautions on handling the NISSAN Mode3 cable
Do not pull, twist, bend, step on, or drag the cable. In the event of an abnormality or problem:
Do not use NISSAN Mode3 cable when there is an abnormality or problem, such as a deep cut, crack, or damage, or if the cable is corroded.
If charging stops when you move the cable, this may be caused by a line breakage. When this happens, immediately stop using NISSAN Mode3 cable.
Immediately stop using NISSAN Mode3 cable if you notice an abnormality or problem such as a strange smell, smoke, or unusual noises being emitted from NISSAN Mode3 cable while charging.
Handle the NISSAN Mode3 cable carefully. For example, do not drop the NISSAN Mode3 cable, subject it to excessive shocks, or immerse it in water.
Precautions on storing the NISSAN Mode3 cable
Do not store the NISSAN Mode3 cable in a place exposed to direct sunlight.
Do not store the NISSAN Mode3 cable in a place exposed to wind and rain.
Be sure to store NISSAN Mode3 cable with the protective cap on to keep the terminal part of the normal charge connector away from dirt and dust.
Do not store the NISSAN Mode3 cable in a condition in which the cable is twisted.