8.3.3.3. Operating tips

When the view is switched, the display images on the screen may be displayed with some delay.

When the temperature is extremely high or low, the screen may not display objects clearly. This is not a malfunction.

When strong light shines directly on to the camera, objects may not be displayed clearly. This is not a malfunction.

The screen may flicker under fluorescent or LED light sources. This is not a malfunction.

The colours of objects on the Intelligent Around-View Monitor may differ somewhat from the actual colour of objects. This is not a malfunction.

Objects on the monitor may not be clear and the colour of the object may differ in a dark environment. This is not a malfunction.

There may be differences in sharpness between each camera view of the bird's-eye view.

If dirt, rain or snow accumulates on the camera, the Intelligent Around-View Monitor may not display objects clearly. Clean the camera.

Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth that has been dampened with a diluted mild cleaning agent and then wipe with a dry cloth.

Do not damage the camera because the monitor screen may be adversely affected.

Do not use wax on the camera lens. Wipe off any wax with a clean cloth that has been dampened with a mild detergent diluted with water.