8.4.2.4. Operating tips

Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth dampened with a diluted mild cleaning agent and then wipe with a dry cloth.

Do not damage the camera as the monitor screen may be adversely affected.

The screen displayed on the Intelligent Around View Monitor will automatically return to the previous screen when no operation takes place for 3 minutes after the CAMERA button has been pushed while the shift lever is in a position other than the R (Reverse) position.

The display of images on the screen may be delayed after screens are switched. Objects in the Intelligent Around View Monitor may be distorted momentarily until the Intelligent Around View Monitor screen is displayed completely.

When the temperature is extremely high or low, the screen may not display objects clearly. This is not a malfunction.

When strong light directly shines on the camera, objects may not be displayed clearly. This is not a malfunction.

The screen may flicker under fluorescent light. This is not a malfunction.

The colours of objects on the Intelligent Around View Monitor may differ somewhat from those of the actual object.

Objects on the monitor may not be clear and the colour of the object may differ in a dark location or at night. This is not a malfunction.

There may be differences in clearness between each camera view of the bird’seye view.

If dirt, rain or snow attaches to the camera, the Intelligent Around View Monitor may not display objects clearly. Clean the camera.

Do not use wax on the camera window. Wipe off any wax with a clean cloth that has been dampened with a mild detergent diluted with water.