11.7.2.2. Changing engine oil filter

Park the vehicle on a level surface and apply the parking brake.

Turn the engine off.

Drain the engine oil according to the proper procedure. (See

Loosen the engine oil filter with an oil filter wrench.

Depending on the engine model, a special cap type wrench may be required. See a NISSAN dealer or qualified workshop for more information.

Remove the engine oil filter by turning it by hand.

Wipe the engine oil filter mounting surface with a clean cloth.

Be sure to remove any old gasket remaining on the mounting surface.

Apply the new engine oil to the gasket of the new oil filter.

Screw in the oil filter until a slight resistance is felt, and then tighten an additional 2/3 of turn to secure the oil filter.

Refill the engine oil. (See

Start the engine and check for leakage around the oil filter. Correct as required.

Turn the engine off and wait several minutes.

Check the engine oil level according to the proper procedure. (See