Nissan Qashqai e-POWER 2023 Owners Manual
5.17.1.2. If the sunshade does not operate
Due to electrical or mechanical issues, the sunshade could require initialisation to return it to normal working order.
Initialisation of the sunshade
If the sunshade is not functional at all (no movement is possible) implement the following initialisation procedure:
Switch power switch ON.
Irrespective of sunshade position, press and hold the CLOSE side of the switch (1). After 5 seconds a step-by-step closing movement starts until the front of the sunshade makes contact with the frame.
Release the button when the movement has stopped.
At this point the sunshade should be fully functional.
Re-initialisation of the sunshade
If the sunshade is partially closed, but movement is still possible, implement the following re-initialisation procedure:
Switch power switch ON.
Press and hold the CLOSE side of the switch (1) and close the sunshade as far as possible.
Release the button when the movement has stopped.
Press and hold the CLOSE side of the switch (1) again. After 5 seconds a step-by-step closing movement starts until the front of the sunshade makes contact with the frame.
Release the button when the movement has stopped.
At this point the sunshade should be fully functional
Anti-pinch (auto-reverse) learning of the sunshade
After the initialisation or re-initialisation procedure, it is recommended to perform the anti-pinch learning procedure.
Within 5 seconds of completing the initialisation or re-initialisation procedure described above:
Press and hold the CLOSE side of the switch (1). A complete continuous opening movement followed by a complete continuous closing movement will occur.
Release the button when the movement has stopped.