8.26.3. Operating tips

The screen displayed on the IAVM will automatically return to the previous screen three minutes after the <CAMERA> button has been pressed while the shift control system is in a position other than the R (Reverse) position.

When the view is switched, the display of images on the screen may be displayed with some delay.

When the temperature is extremely high or low, the screen may not display objects clearly. This is not a malfunction.

When strong light directly shines on the camera, objects may not be displayed clearly. This is not a malfunction.

The screen may flicker under fluorescent light. This is not a malfunction.

The colour of objects on the IAVM may differ somewhat from the actual colour of objects. This is not a malfunction.

Objects on the monitor may not be clear and the colour of the object may differ in a dark environment. This is not a malfunction.

There may be differences in sharpness between each camera view of the bird's-eye view.

If dirt, rain or snow accumulates on the camera, the IAVM may not display objects clearly. Clean the camera.

Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth that has been dampened with a diluted mild cleaning agent and then wipe with a dry cloth.

Do not damage the camera because the monitor screen may be adversely affected.

Do not use wax on the camera lens. Wipe off any wax with a clean cloth that has been dampened with a mild detergent diluted with water.

A click sound is made when the vehicle comes to the target position in each step. Stop the vehicle when the click sounds and follow the next guidance.

Depending on the situation, multiple parking manoeuvres may be required.