Nissan Qashqai e-POWER 2023 Owners Manual
8.26.2.2. Parking in a bay
The system detects lines on the ground for parking slots by processing images from the camera, and displays a rectangle in the centre of the parking lines to set a target for parking.
When there are no parking lines for parking spots and parking slots cannot be detected, a target parking rectangle is displayed at a default position by pressing the 
button.
Stop the vehicle near to the space where you wish to park.
Press the <CAMERA> button, followed by the IPA button
on the screen or the IPA switch (where fitted) on the lower instrument panel.Press Parking Mode button
, and check the bay parking mode is displayed.
If the bird's-eye view is not displayed on the front passenger side of the screen, press the <CAMERA> button until the bird's-eye view is displayed.
Use the turn signal switch to select the side of the vehicle where the parking bay is situated.
The bay parking mode is displayed. Use the turn signal switch to select the side of the vehicle where the parking bay is situated.
Stop vehicle alongside, and approximately 1 m (3 ft) from the parking place. The system will search for a parking space. The IPA system will inform you when it finds a suitable parking space. When there are no parking lines for parking spots and parking slots cannot be detected, a target parking rectangle is displayed at a default position by pressing the
button. Then you can press [Start].
Adjust the target parking rectangle using the arrow keys on the screen so that the clearance guidelines do not overlap any obstacles around the vehicle.
After pressing [Start] the vehicle will park within the blue area. Make sure this area is free of obstacles.
Press [Start].
The vehicle starts the parking procedure. The IPA operation can be started when the following conditions are met:
The vehicle is completely stopped by depressing the brake pedal.
The steering wheel is in the straight-ahead position.
The shift control system is in the D (Drive) position.
If the vehicle deviates from the parking rectangle while following the parking procedure, stop and adjust the position.
If there is any doubt that the surroundings in the path of the parking area and/or the parking area itself are not free from obstacles immediately stop the vehicle and check.
Gently place hands on the steering wheel and slowly move the vehicle forward to the correct position indicated in green in preparation for reversing.
Bring the vehicle to a standstill.
The steering wheel will turn itself towards the reverse starting position rectangle (green).
Depress the brake and stop the vehicle when it approaches another vehicle or object, or when the vehicle reaches the reverse starting position.
Shift to the R (Reverse) position.
Gently place hands on the steering wheel and slowly reverse to the parking space.
Steering will be operated automatically.
Only the steering operates automatically.
Follow the instructions given by the system.
Carefully and slowly accelerate while checking the surroundings.
Use of the steering wheel will cancel the IPA operation.
When the vehicle is in the target parking position, check, then depress the brake pedal to stop the vehicle.
When the vehicle reaches the approximate area of the target parking space, a chime will sound, [Park assist finished] will appear on the centre display and the IPA operation will automatically terminate.
Make any final adjustments that may be necessary manually, after confirming the vehicle's surroundings.
The system can be cancelled at any time:
By engaging the P (Park) position.
By shifting to the N (Neutral) position.
By overriding the steering manoeuvre.
By pressing the [Cancel] button on the centre display.